Intex 1000 GPH 120 V Cartridge Filter Pump
- Above Ground Pools
- Apr 24
- 3 min read
Updated: 8 hours ago
Looking for a reliable, easy-to-use cartridge filter pump to keep your above-ground pool sparkling clean? The Intex 1000 GPH (gallons-per-hour) 120 V Cartridge Filter Pump strikes a great balance of performance, affordability, and simplicity - perfect for small to medium-sized pools. Let’s dive into what makes this model a top choice, how to install and maintain it, and tips to get the most out of your pump.
Key Features at a Glance:
Why Choose the Intex 1000 GPH Cartridge Filter Pump?
Efficient Filtration
At 1,000 GPH, this pump cycles the entire volume of a mid-sized above-ground pool in roughly 4–6 hours, removing debris, leaves, and fine particles more effectively than simple strainer pumps.
Energy-Conscious Design
Drawing approximately 150 W, it’s kinder to your electricity bill than larger sand-filter systems, yet powerful enough to maintain crystal-clear water.
User-Friendly Cartridge System
The Type A cartridge is easy to slide in and out for cleaning. No backwashing required—just rinse the cartridge with a garden hose every 1–2 weeks. Replacement cartridges run under $15, keeping operating costs low.
Compact & Portable
Weighing just 6.9 pounds and with a small footprint, it fits conveniently beside your pool. The light weight and compact size makes it easy to move into storage during the off-season.
Cartridge Gauge
The filter pump comes with a very convenient cartridge gauge at the top of the unit. This will allow you to see at a glance if the cartridge needs cleaning/changing, rather than opening the unit each time to check how the cartridge is holding up.
Installation Guide
Position the Pump:
Place on a flat, stable surface within 3 m of your pool’s inlet/outlet ports.
Connect Hoses:
Attach the 1.25in hoses from your pool’s inlet and outlet to the pump’s “IN” and “OUT” ports. Secure with the provided hose clamps.
Insert Cartridge:
Open the pump housing, slide in a clean Type A cartridge, and close the lid hand tight (no tools needed).
Prime & Power Up:
Fill the pump housing halfway with water to prime. Plug into a 120 V outlet. Press the “ON” button—water should begin flowing within seconds.
Set Run Time:
For best results, run 6 - 10 hours per day. Use the simple timer switch to automate.
Maintenance Tips:
Weekly Checks: Inspect hoses and clamps for leaks.
Cartridge Cleaning: Rinse every 7–14 days; soak in filter cleaner monthly.
Winterizing: Drain all water, remove cartridge, store pump indoors at temperatures above 5 °C.
Replacement Schedule: Cartridges typically last 6–8 months with regular cleaning; have a spare on hand.
Troubleshooting
Maximizing Performance
Pre-Filter Skimmer: Install a leaf skimmer sock on your pool’s skimmer to catch large debris before it reaches the pump.
Balanced Water Chemistry: Keep pH between 7.2–7.6 to reduce scale buildup on the cartridge.
Solar Cover: Reduces debris entry and eases the pump’s workload.
Final Thoughts
The Intex 1000 GPH 120 V Cartridge Filter Pump is an excellent solution for above-ground pool owners seeking clear water without complexity. Its balance of flow rate, energy efficiency, and simplicity makes routine pool care a breeze. With basic installation and minimal maintenance, you’ll spend less time worrying about filtration and more time enjoying your pool.
Ready to upgrade your pool maintenance? The Intex 1000 GPH cartridge filter pump offers dependable performance at a wallet-friendly price - making crystal-clear summer days well within reach.
Comments